Crossing the line...

[posplayr]

Carb O-Rings and carb boot O-Rings (plus new SHCS) ordered from Robert Barr. New air filter from sleazeBay on the way. I really can't swing another $20 for carb dip so I'm hoping that a disassemble and spray will do the trick. Also, fingers crossed that my fuel bowl gaskets survive the disassemble...

Should have said to pull pilot jets and main jets. Push a piece of copper wire through the jets to make sure they are clear especially if your eye sight is not what it used to be.

Small prices of plastic have been know to lodge in a pilot jet which no amount of spray will dislodge.

[Guest]

pull pilot jets and main jets. Push a piece of copper wire through the jets to make sure they are clear especially if your eye sight is not what it used to be.

Works for me!