Carb synch Mikuni

[JTGS850GL]

1/2" drive, for me, is the only size that has a socket for the rear axle nut. Beyond that it's mostly the 1/4" set and sometimes the 3/8" set as well.

[eil]

It all depends on the sockets you have. My hodgepodge of cheap sockets are mostly 1/4" up to a certain size (14mm?) and 3/8" after that. I believe all of my deep-well impact sockets are 1/2".

[dgates1]

Anybody know if you can order that “special tool” for the synch screws and locknuts anymore and what it might be called to search for??

[1978GS750E]

Maybe start a new thread instead of asking in a 10 year old one would get better answers?

[dgates1]

Just thought this one already had the relevant information. Tried searching for a post that already discussed it but didn’t know what terms to search for.

[Burque73]

Anybody know if you can order that “special tool” for the synch screws and locknuts anymore and what it might be called to search for??

This is similar to the one I have from I think motion pro.

https://www.aliexpress.com/item/3256804649130602.html

[Big T]

Anybody know if you can order that “special tool” for the synch screws and locknuts anymore and what it might be called to search for??

Motion Pro is the manufacturer