Advice on where to start?

[Anthony]

Thanks eil, that was the answer I was looking for! I didn't think I had intake o-rings but I just wanted to make sure. So I just need the CV(BS) o-rings from cycleorings then?

[eil]

Yeep. .

[mrbill5491]

Do your self a big favor, replace every JIS screw you can with metric allen SS fasteners and lock washers. Not only does it look better, it is easier to work with. I got all mine from Fastenal.

[Big T]

Anthony

Go here and order bolts from this guy

mailto:Polarroler1@aol.com

http://www.ebay.com/itm/Suzuki-carburetor-screws-gs1000-gs850-gs750-gs550-/230382986208?pt=Motorcycles_Parts_Accessories&vxp=mtr&hash=item35a3e563e0

This set is for VM carbs, just check his username for CV carbs

Much cheaper than the hardware store

[Anthony]

Wow definitely a great resource for that. Any recommendations for an impact driver?

[Phred]

Z-1 Enterprises also carry the Allen headed bolts for the engine casings and carbs in stainless steel. I ordered a set from them for about $25 Got way more than I needed but all lengths and sizes were in the package. Priced at the local supplier it would have been over $100 for the same thing.

[mrbill5491]

Z-1 Enterprises also carry the Allen headed bolts for the engine casings and carbs in stainless steel. I ordered a set from them for about $25 Got way more than I needed but all lengths and sizes were in the package. Priced at the local supplier it would have been over $100 for the same thing.

Yeah I got the kit for my bike as well, nary a JIS screw left on my bike.