High flow petcock

[yoshisakan]

Hey all, I have a bandit 1200 powered gs1100lt bike. My bst34ss carbs have 2 fuel lines and id like to get a petcock with 2 outlets to match. I also am going to run nitrous. What is my best solution here? Im using a gs1100 tank.

[Guest]

get a Pingel

[Guest]

Why are you using the 34mm carb is it what you have so your just making them work for now?
You know the Bandit came with 36mm carbs?

[yoshisakan]

Sorry, theyre bst36ss. I midtyped. Jetted with the dynojet kir and larger pilot jets. Cant remember specs exactly.

[yoshisakan]

Does pingel make them with the gs flange? Wheres a good place to order them?

[Guest]

Dennis Kirk has them

[Guest]

Get the 52mm mounting plate since the L tank is different. Get a dual output with a reserve.

[yoshisakan]

Get the 52mm mounting plate since the L tank is different. Get a dual output with a reserve.

Any idea where to source these? I didn't see a 52mm plate on pingel's website or dennis kirk. Do I need to call them and have it custom made?

Thanks

[rapidray]

Call Pingel at 608-339-7999.
Ray.

[yoshisakan]

Thanks ray, i'll give them a call tomorrow. As far as clutches are concerned, can I get away with a trac king? I'm using the stock clutch now. My 1200 has stock internals and im going to run an 80shot with a NX direct port kit. Will a trac king hold up on the street also?

[Guest]

http://www.z1enterprises.com/ItemDetails.aspx?itemDescription=Pingel+Petcock+Adapter+Plate+Pingel+50mm+3%2f8+NPT&item=KL18-7226

This is what you need
Sorry it is 50mm and not 52.

[yoshisakan]

http://www.z1enterprises.com/ItemDet...item=KL18-7226
This is what you need
Sorry it is 50mm and not 52.

Thanks for the clarity chef. I'll be ordering one today. Any experience with trac king clutches? Do you think they'll hold an 80 shot on the street? This nitrous setup is not to be crazy, just to humble those kids on the new liter bikes.

[yoshisakan]

Did some more research, looks like im going to need a lot more than clutch discs. Looking at the MTC 2 stage lock up. I've never used a lock up before, are they streetable?

[Guest]

They are streetable.

[yoshisakan]

I bought the MTC 2 stage lock up. It works with the stock bandit 1200 clutch. I'll report back on it's performance, but from what i've read, it should work nicely.