Hi, my 1150 powered Kat is getting the treament.1230 kit & rs36.Will i need to get a pingel tap or do you think the stock one will be ok?
-
-
i had problems with my 1150 stock fuel valve and RS36's...at the strip the bike would just nose over.
i crack the gas cap and it would make a full pass.
i then installed a pingle duel outlet and ran the cap closed...she was fixed!
now on my bandit with RS38's it was fine...no starvation at all....just ran it on prime when at the track. -
Your RSs will have 2 inlets. Get a dual outlet Pingel petcock & adapter plate. Get the one with "Reserve" in it.
Ray.Comment
-
What is the adapter spacing on the 1150? 44 mm?"Thought he, it is a wicked world in all meridians; I'll die a pagan."
~Herman Melville
2016 1200 Superlow
1982 CB900fComment
-
Pingel makes adapters of various mount bolt offsets and 44mm is one of them. They also make a blank adapter where you drill your own holes as the thread that the bolt threads into is in the tank and not the adapter. You can get a 44mm plate.Comment
-
I've seen the various plates. I haven't measured my bolt spacing, but was hoping someone who is running a Pingel on an 1150 could let me know what he did."Thought he, it is a wicked world in all meridians; I'll die a pagan."
~Herman Melville
2016 1200 Superlow
1982 CB900fComment
-
I mounted the Pingel. It was a bit of a PITA to get it set without any leaks. LOVE the smooth action of the lever, and knowing how well it flows."Thought he, it is a wicked world in all meridians; I'll die a pagan."
~Herman Melville
2016 1200 Superlow
1982 CB900fComment
Comment