Hey guys!! Trying to put my carbs back on and figure out the fuel and vent line configuration!! Need some help!! Thanks in advance!!
-
-
Check the carb rebuild tutorial linked in my signature. Also, check "Where do the hoses go" from Cliff's site...http://members.dslextreme.com/users/bikecliff/Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
Thanks alot Nessism that helped me out!!Comment
-
Check out the Newbie Mistakes thread linked in my signature too. It will help you avoid some common pitfalls.
Remember, shortcuts are long cuts when it comes to doing maintenance on your bike.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
I have a 450 and the link to Cliff's site helped, but I want to be sure. I only have two carbs. Here is what I think everything goes.
one hose goes from the breather box to the top of the enginethe fuel line from the petcock goes to the T between the carbsthere are two nipples angled down for drain hosesThen there is a nipple on the left carb that I think is for vacuum, but I don't know where the other end of the hose goes...Comment
Comment