85 GS1150 carb question
Collapse
X
-
85 GS1150 carb question
Are the 2 nipples on the airbox side of the GS1150 carbs, 1 on #1 & 1 on #3, just float bowl vents ? If not what are they ? In the manual it just shows the hose running over the top of the air filter box and ending as best I can tell. Sorry for all the questions, this bike was kind of a put it together kitTags: None -
Yes, vents.sigpic
When consulting the magic 8 ball for advice, one must first ask it "will your answers be accurate?"
Glen
-85 1150 es - Plus size supermodel.
-Rusty old scooter.
Other things I like to photograph.....instagram.com/gs_junkie
https://www.instagram.com/glen_brenner/
https://www.flickr.com/photos/152267...7713345317771/ -
Are the 1150 carbs different or are you not numbering them correctly?
Carbs are numbered from left to right, as if you were sitting on the bike.
#1 is under your clutch hand, #4 is under your throttle hand.
Yes, the nipples (and the hoses that attach to them) on carbs 2 and 4 are, indeed, vents.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
Steve, you caused me to recheck
...yes 1&3 20150901_190332.jpg
sigpic
When consulting the magic 8 ball for advice, one must first ask it "will your answers be accurate?"
Glen
-85 1150 es - Plus size supermodel.
-Rusty old scooter.
Other things I like to photograph.....instagram.com/gs_junkie
https://www.instagram.com/glen_brenner/
https://www.flickr.com/photos/152267...7713345317771/Comment
-
Katarat
I was always told they numbered from left to right sitting on the bike. If youre right then its #2 & #4. Anyway thanks for verifying what I thought. Did you know that if you leave the float limiter off the needle & seat gas will flow out of one of them, I do. That's something you don't want to learn after the carbs are back on the bike. That's what old age back pain will do for you.Comment
-
Katarat
http://www.mtsac.edu/~cliff/storage/...d_Tutorial.pdf check here for carb numbering, its what I said it wasComment
-
sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
Guest -
Katarat
Comment