1983 GS750 Carbs

[JTGS850GL]

Just picked up a set of carbs from a 1983 GS750E (ID# 31300 is imprinted on the sides) for cheap. Getting ready to do a rebuild and noticed a number differences between other BS32SS carbs and these. First off I found that the fuel rails and vent lines are different along with a different vacuum port on the #2 carb. The slides are black anodized and the tops are crinkle black. Everything looks completely factory.

Anyone know if these will fit earlier model bikes that use the BS32SS carbs? I don't have a complete set to verify carb spacing but they look the same. I know they came from a 1983 Suzuki 750E that sat for a number of years.

[TxGSrider]

Have you got a pic of them?

[JTGS850GL]

I'll get some pics together when I get home. I did check and the carb spacing is about 1/8 inch wider between the 2nd and 3rd carbs based on the rails that I did have. Would like to know what bikes these are compatible with. I think the carbs should be compatible with many of the GSX's.

[Guest]

They will work on earlier 16 valve motors as long as the boots ar still flexible spacing is a little different. Jetting is alittle different also.(choke) enrichiner linkage is different also