Vacuum source for fuel valve?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Canadian8apilot
    • Feb 2026

    #1

    Vacuum source for fuel valve?

    Got myself a 78 GS750 for a project bike, and it seems to be all there, but I'm not sure if I put the vacuum line back in the right spot after I put the gas tank back on... I have a Haynes manual, but no luck identifying the spot to hook it up.
    There's a nipple on the #3 carb near the fuel "T" but the other cards have a vent hose on them in that spot.???

    Thx.
    Bill
    Attached Files
  • bonanzadave
    Forum Guru
    Past Site Supporter
    • Jul 2006
    • 9623
    • Minnesota

    #2
    82 1100 EZ (red)

    "You co-opting words of KV only thickens the scent of your BS. A thief and a putter-on of airs most foul. " JEEPRUSTY

    Comment

    • hannibal
      Forum Sage
      • Jun 2015
      • 1033
      • Washington DC

      #3
      Vacuum line goes to #3 carb.
      Jordan

      1977 Suzuki GS750 (My first bike)
      2000 Kawasaki ZRX1100
      1973 BMW R75/5

      Comment

      • Canadian8apilot

        #4
        Thanks guys... thought so but found nothing in my manual

        Comment

        • Guest

          #5
          You can get a factory manual here : (http://members.dslextreme.com/users/bikecliff/)

          Comment

          • allojohn
            Forum Sage
            Past Site Supporter
            Super Site Supporter
            • Jan 2011
            • 3515
            • NoMo, MN

            #6
            Single front disk and wire wheels usually (not always) indicates a '77. The jets were different in the early ones and as you're running pods you will need to change up if you haven't already.
            -Mal

            "The only reason for time is so that everything doesn't happen at once." - B. Banzai
            ___________

            78 GS750E

            Comment

            • Wade_

              #7
              Thanks for the thread, folks, I was able to hook up the fuel line and vacuum line.

              Comment

              Working...