Slingshot carbs on ?83 GS1100E

[PSM873]

Hi,

I?m trying to fit a set of slingshot carbs on to my 1983 GS 1100 E (16V) but spacing is far off, has any of you done this before and do you know if there any intake boots that will fit this?

Thank You

Roy

[Guest]

What were the carbs off of? AFAIK, all the oil cooled GSXR's have the same bore spacing as the 16V GS engines.


Mark

[posplayr]

What were the carbs off of? AFAIK, all the oil cooled GSXR's have the same bore spacing as the 16V GS engines.


Mark

86-92 gsxr 1100 are same spacing as gs 16v but the boots are larger especially 38-40 mm

[steve murdoch]

If i remember correctly, 36mm might work with a stock 1100 engine but 38 or 40mm need a BIG engine to perform properly.

[PSM873]

I don't remember the year, bout around 90-92. The bore spacing might be the same, but the carb spacing aint. The original carbs are 11 1/4" and the slingshot carbs are 11 7/8" (measured from the outside of left carb to outside of the Right carb)

[limeex2]

GSXR 1100 carbs fit right in. Little tight but with new boots and pods its no problem

[PSM873]

GSXR 1100 carbs fit right in. Little tight but with new boots and pods its no problem

Is it the same boots on the gsxr as the GS?

[posplayr]

Is it the same boots on the gsxr as the GS?

Use the oem 1100 boots