1980 gs550e stage 3 kit from dynojet

[Guest]

Does anyone know a current stage 3 dynojet kit that will work for my 80' gs550e? I read on posts from years ago about getting the kit for the 82' 550m but that isn't on dynojet's website anymore. There is a kit for an 82' Katana 550 which in pictures looks to have CV carbs like my bike. Anyone know if thats the one people were talking about in the old posts?

[Nessism]

550M = Katana

[Yozzer74]

I've bought this kit for my gs550e 1982.fitted it other day bike as got k&n pod filters custom made 4into 2 pipe .Bike was ok on tick over but would not rev .before fitting kit went with base settings in dyno kit instructions. Which were 150 mains 3rd notch on needles air screw two and half turns out .Bike runs better but still got a big flat spot just off first part of throttle. Going to lift c clip one more notch tomorrow. Will report back

[LightsOut]

The 550M is indeed the Katana and has BS32SS carbs - not sure what the 1980 E has but if they're the same ones the kit should work? Let me know if you want pics etc bamboozle, I have the carbs off my 550M.

Yozzer - looking forward to hearing how it works out! Looking at getting those same K&Ns as you (following on DTT )

[Yozzer74]

It's not working out good at minute bike running like a dog.ill let you know what I've done if &when I get it running right fingers crossed.