82 gs650gl air fuel screw part number/source

[Kpaige]

I searched the forum but have not found the info.
due to damage I need to replace all 4 air mixture screws but have been unable to find a supplier
so
what model mukini carbs were on the 82 gs650gl?
anyone have a good source or a cross ref to ones that will work?
I have all the other parts needed just need these?

[Guest]

BS32SS.

http://members.dslextreme.com/users/bikecliff/images/carbspec_float_height.html

If you're talking about the pilot screw, I'm not sure where you would find those in the States, as they were originally intended to be sealed. Someone in your area will probably know of a source.

[Guest]

I couldn't find the mixture screws individually, but I did find some rebuild kits that have them included.

https://www.ebay.com/itm/SUZUKI-GS650-K-L-CARBUREOTR-CARB-REBUILD-REPAIR-KITS-1981-1983-x-4-/291732059962?vxp=mtr&hash=item43ec95f73a

https://www.ebay.com/p/K-L-Supply-18-2584-Carburetor-Repair-Kit/171241707?iid=372123349202&_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D2%26asc%3D20150604093004%26meid%3D8883b298432747bf80ceeeb62e0c2a66%26pid%3D100005%26rk%3D1%26rkt%3D12%26sd%3D142298186893%26itm%3D372123349202&_trksid=p2047675.c100005.m1851

[Kpaige]

I couldn't find the mixture screws individually, but I did find some rebuild kits that have them included.

https://www.ebay.com/itm/SUZUKI-GS650-K-L-CARBUREOTR-CARB-REBUILD-REPAIR-KITS-1981-1983-x-4-/291732059962?vxp=mtr&hash=item43ec95f73a

https://www.ebay.com/p/K-L-Supply-18....c100005.m1851

Yes seen those
I have a bigger issue now as all 4 of these are broke off in the carbs and will not come out so I need 4 new carbs

[Kpaige]

Ok managed to get all four clean just need these screes!

[Steve]

Are you saying that you also got the mixture screws out?

.

[tom203]

Do you mean that the points of the mixture screws were broken off/stuck in carb throats ?? Or that the mixture screw threaded portions are stuck in car bodies?

[Kpaige]

The points were broken off in the carbd. I got all 4 points out with some finesse and a sewing needle
but still all diagrams do not show a part number all research comes up blank Everyone Supplier I have contacted said no part available as originally these were capped. But there has to be a part number that works!

[tom203]

Finesse! Today is lucky day to spend money! This guy has some and they appear to be genuine mikuni but expensive. Know any machine shops with swiss style lathes? They could spit these out easy knowing the dimensions.

https://www.ebay.com/itm/New-Suzuki-GS650-GS-650-81-83-mikuni-CARBURETOR-PILOT-NEEDLE-SCREW/292524107882?hash=item441bcba86a:g:reIAAOSw0l9a0hCa:sc:USPSFirstClass!04029!US!-1