My plan was to block off all these openings in a tasteful way as I would figure it would run the best doing so...this is a necessary is it not? Havent had the carbs off and apart to clean and service yet but the rest of the bike is stock so I would suspect stock jetting...
Announcement
				
					Collapse
				
			
		
	
		
			
				No announcement yet.
				
			
				
	
Gs1100E airbox questions.
				
					Collapse
				
			
		
	X
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	
 Gs1100E airbox questions.So the 81' Gs1100e I acquired came void of an airbox...I found this one on Ebay and it's missing a top lid which it looks like I will have to fab as I have heard they are unobtainable. Question being is there are 4 holes cut in with a hole saw and I believe the rectangle hole on the side is also non stock???
 My plan was to block off all these openings in a tasteful way as I would figure it would run the best doing so...this is a necessary is it not? Havent had the carbs off and apart to clean and service yet but the rest of the bike is stock so I would suspect stock jetting...-1981 Suzuki GS1100E
 -1975 Honda CB400 Super Sport
 -1981 Vespa P200E
 -1990 Ktm 540 dxc
 -1982 Ktm 495
 -1981 Ktm 495
 -1989 Atk 406
 -1987 Cr 500R
 -1982 Yz 125Tags: None
 
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	
 A pic through the missing lid to the other 2 holes....also it came with an old deteriorated UNI, should I replace with such or go OEM?Attached Files-1981 Suzuki GS1100E
 -1975 Honda CB400 Super Sport
 -1981 Vespa P200E
 -1990 Ktm 540 dxc
 -1982 Ktm 495
 -1981 Ktm 495
 -1989 Atk 406
 -1987 Cr 500R
 -1982 Yz 125
 
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	
 If you are looking for a complete box unmolested with lid, I have a couple on the shelf.
 
 PM me if needed.
 
 Nic83 GS1100ES rebuild:
 
 http://www.thegsresources.com/_forum...d.php?t=170032
 
 Budget GSXR Conversion:
 
 http://www.thegsresources.com/_forum...d.php?t=200563
 
 New to me bike: 2008 B-KING
 Comment
.png)

Comment