Light in speedometer

[Herzie]

Hi guys.

The light in my speedometer is out. It worked not to long ago. I've checked the wires and they are fine. Has anyone got any experience changing the bulb? I had a quick look the other day but couldn't find any obvious way to change it.

[Guest]

Take off the back of the speedo. (Two nuts) Take out the light. Change bulb.

[Einstein]

The bulb fits into a rubber bung that just pulls out of the speedo/tach..

once out, the bulb is a bayonet fit.


John

[Herzie]

Ok thx guys. I just removed the metal back and didn't find anything other that a white plastic housing. I'll try and see if I can take it further apart.

[Guest]

There has to be wires that go into the speedo from somewhere in order for there to be a light.

[Andr?]

Once you'll have it out (bulb) it is advice to lub that rubber housing, I encounter some that were so glued to the speedo that they broke under pressure when I tear them out, a light grease can do.

Good luck

[Herzie]

There has to be wires that go into the speedo from somewhere in order for there to be a light.

Well there were wires though I just couldn't see any lightbulbs or a fitting for it.

[Herzie]

Once you'll have it out (bulb) it is advice to lub that rubber housing, I encounter some that were so glued to the speedo that they broke under pressure when I tear them out, a light grease can do.

Good luck

thank you. I'll remember to do that.