RR output question...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • crapwacker

    #16
    Originally posted by hikermikem
    12 gage with soldered ring terminals...
    Just so I get this right: the rr is grounded to the battery case with a screw, and this wire should be extended to battery neg, as well as adding an additional ground wire to the frame?

    Comment

    • Guest

      #17
      you don't have to extend that wire... run a new ground wire from the existing RR ground bolt to the battery neg terminal. You can run a new ground to the frame from the RR gound bolt as well... keeps a lot of wires off the battery.

      Comment

      • crapwacker

        #18
        Originally posted by hikermikem
        you don't have to extend that wire... run a new ground wire from the existing RR ground bolt to the battery neg terminal. You can run a new ground to the frame from the RR gound bolt as well... keeps a lot of wires off the battery.
        Hey thanks i like the sound of that!!

        Comment

        Working...