wire for low battery idiot light

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 62 bugzilla

    #1

    wire for low battery idiot light

    I'm looking for the wire for the low battery idiot light on a 79 gs 1000 engine. I have a 83 gs 1100 e front end with cluster I'm wiring on it and it has the light and wanted to hook it up. Location and or color would be awsome.
  • Guest

    #2
    The warning light in the gauge cluster is actually a 'low battery fluid' indicator.... on the '82/'83 it works via a probe sensor that plugs into a (specially designed) battery featuring a port atop one of the cells, to accept it....light illuminates if the fluid falls below a certain level and the probe is dry. The sensor-compatible batteries are pretty expensive...most of us run either a non-sensor battery, or even better, an AGM battery that you never have to refill. This causes the idiot light to stay illuminated, but you shouldn't have that problem on a 1000, without a sensor.

    Comment

    • posplayr
      Forum LongTimer
      GSResource Superstar
      Past Site Supporter
      • Dec 2007
      • 23673
      • Tucson Az

      #3
      you can just remove the bulb or attach the wire to +battery to get the light to go out.

      Wait a minute, are you using the idiot light control box as well?

      Comment

      • 62 bugzilla

        #4
        control bike

        There is a box that the lights hook to? I just wired up to the lights direct?

        Comment

        Working...