RR wiring verification

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • crapwacker
    • Jan 2026
    #1

    RR wiring verification

    Just a quick check before firing it up. When connecting to a newer Honda RR, there is no specific order in connection the stator leads, correct? I'm asking because my leads are 3 different colors
    Last edited by Guest; 05-18-2010, 08:54 PM.
    Tags: None
    • Nessism
      Forum LongTimer
      GSResource Superstar
      Past Site Supporter
      Super Site Supporter
      • Mar 2006
      • 35787
      • Torrance, CA
      #2
      No order is right. Regarding wiring up the new R/R, I hope you are bypassing that out and back loop to the hand control.
      Ed

      To measure is to know.

      Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

      Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

      Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

      KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

        Comment

        • bobiii84
          #3
          I know that it doesn't matter on the stock RR and even the new RR that I bought for mine. I got a RR with red/white, green/white, and yellow but it didn't matter how I hooked them up. I can't imagine that yours would be any different but I would wait to make sure someone else verifies it as well. Good luck!

            Comment

            • crapwacker
              #4
              Originally posted by Nessism
              No order is right. Regarding wiring up the new R/R, I hope you are bypassing that out and back loop to the hand control.
              By all means! Well by one mean(s). Direct RR, Direct to battery. Sense wire, off switched side of main relay. Unless that is not correct?

                Comment

                • Steve
                  GS Whisperer
                  • Jun 2005
                  • 35924
                  • southwest oHIo
                  #5
                  Originally posted by crapwacker
                  By all means! Well by one mean(s). Direct RR, Direct to battery. Sense wire, off switched side of main relay. Unless that is not correct?
                  Unless something has been added to your bike, there is no "main relay".

                  .
                  sigpic
                  mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
                  hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
                  #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
                  #2 son: 1980 GS1000G
                  Family Portrait
                  Siblings and Spouses
                  Mom's first ride
                  Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
                  (Click on my username in the upper-left corner for e-mail info.)

                    Comment

                    • crapwacker
                      #6
                      Originally posted by Steve
                      Unless something has been added to your bike, there is no "main relay".

                      .
                      The relay that is connected directly to the battery + ? Or is this the starter relay? I was concerned about using the wire coming from coil relay to coils, but I'll use a 5 connector relay there, and use one of the #87 outs for my sense wire.
                      Last edited by Guest; 05-18-2010, 11:02 PM.

                        Comment

                        Previous template Next
                        Working...