Announcement

Collapse
No announcement yet.

coil wire and boot sugestions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    coil wire and boot sugestions

    82 1100e had the tank off and seen my wires are cracking and seeing if you guys have any suggestions.thanks

    #2
    Dyna green coils and Dyna suppression wires.
    1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
    1985 GS1150ES stock with 85 Red E bodywork.

    Comment


      #3
      Hi,

      New coils and wires would be ideal. But if your coils are good and you can't afford a whole new setup, it is possible to remove the wires from the stock coils and replace them. Just be careful chipping away the old epoxy holding them.



      Push the new wire onto the spike and epoxy into place.




      Thank you for your indulgence,

      BassCliff

      Comment


        #4
        who has the best price on these dyna coils? thanks for the insite on using stockers. i may just do that who knows

        Comment

        Working...
        X