plug wires

[Guest]

I've been shopping on the phone for an hour or two looking for 7mm, metallic core plug wire for my 79 GS1000E with Dyna S ignition and Dyna 3 ohm coils and I can get it with stainless steel core. Is that what I want? If not, what other choices do I have?
This a road bike.

[Nessism]

Copper core is good. http://z1enterprises.com/detail.aspx?ID=208

[Fizzyhair]

I'll second that! Copper and oxygen free copper are by far better conductors.

[trippivot]

you should read the DYNA instructions

there is a detail about NO METAL CORE wires.

but you do as you like.

[srsupertrap]

you should read the DYNA instructions

there is a detail about NO METAL CORE wires.

but you do as you like.

So what are you using, these?

http://z1enterprises.com/detail.aspx?ID=1310

[Nessism]

Metal core wires are fine, as long as you use a resistor type spark plug cap, like the stockers or NGK equivilents.

[rapidray]

The RESISTOR wires from Dynatek are 25 bucks a set & what work the best. How many sets you want? Ray.

[Guest]

Thank you all. I did get 7mm copper core.