firing order help
Collapse
X
-
Hodado
firing order help
I may have mixed up plug wires to cylinders.Can someone tell me which wire goes with each cylinder.Left to right as if I was sitting on the bike will be easier for me to understand.ThanksTags: None -
Guest
When sitting on the bike, the left coil wires feed cyls 1 & 4, the right coil wires go to cyl's 2 & 3... -
Suzuki_Don
The actual firing order is 1, 2, 4, 3, but this is not really relevant when determining which wires go to which cylinders.
The left coil as you are sitting on the bike has two coil wires and one each goes to cylinders 1 & 4.
The right coil as you are sitting on the bike has two coil wires and one each goes to cylinders 2 & 3.
Hope this helps.
EDIT: Sorry, HIKERMAN beat me by 1 minute. I will have to be quicker next time.Comment
-
Cylinders are numbered from left to right. One coil feeds 2-3 and the other 1-4. Not sure which is which on your bike but you can download a Suzuki repair manual for free from Basscliff's site.
Edit: those other guys posted while I was typing (I must be getting slow).Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
Hodado -
Hodado
So the coil on the left while sitting on the bike
the wire marked 1/3 go on the outside left cylinder
the wire marked 2/4 go on the middle left cylinder
the coil on the right
the wire marked 1/3 go on the outside right cylinder
the wire marked 2/4 go on the middle right cylinder
Is this correct??Comment
-
CYLINDER #1 is on the left , #4 is on the rightSo the coil on the left while sitting on the bike
the wire marked 1/3 go on the outside left cylinder
the wire marked 2/4 go on the middle left cylinder
the coil on the right
the wire marked 1/3 go on the outside right cylinder
the wire marked 2/4 go on the middle right cylinder
Is this correct??Comment
Comment