Coils

[bikebuilder2009]

Searching threads, found a lot of information on coils from different bikes you can use on the gs's. Does anyone know if there is a coil out there with removable/replacable wire's? Either screw on or push on? I know you need 3 ohm coils. Thanks

[koolaid_kid]

Sure there is. for example, I am currently running one coil from my GPz on my GS, and it has removeable/replaceable wires.
Are the Dyna coils out of the question?

[bikebuilder2009]

Sure there is. for example, I am currently running one coil from my GPz on my GS, and it has removeable/replaceable wires.
Are the Dyna coils out of the question?

No, the dyna coils are not out of the question, but out of my price range.

[koolaid_kid]

Well, I guess it's really the same thing, right? They are out of the question for my GS at this time also, which is why I am using a Kaw coil.
Here are some new ones: http://www.crc2onlinecatalog.com/Index_Main_Frame.htm
Select Electrical (on the left) then Coils, then scroll down. They claim you can use coils from Honda 79-86 or Kaw 80-86.
Best of luck.

[Guest]

A set of Dyna Green coils are $126.00, and $17.00 for the 8mm suppression wires at Z1. The best chew toy I've gotten for my bike in a long time. Huge difference in the way it runs!

[bikebuilder2009]

A set of Dyna Green coils are $126.00, and $17.00 for the 8mm suppression wires at Z1. The best chew toy I've gotten for my bike in a long time. Huge difference in the way it runs!

I know that make a big difference, I've had them before, but right now I can only afford the dyna ds3-2. But when the funds are available I will upgrade to the green coils and 8mm wires. Thanks for the input.