85 GS400S Coils

[skyhigh4by]

Im trying to figure out if I can use my accel 140408 coil to replace the stock coils and also if it might have some performance gains.

I have been searching the web to figure out the ohms of the stock coils but not having any luck. The 140408 coil is 3 ohm.

Thanks.

[skyhigh4by]

No one knows?....

The bike I have was only released in Canada as far as I know. I am having trouble finding much information on them around the web. What I know is that it is a 85 GS400S, I believe it is the 4 valve 44 HP model. I had heard that it is the same as the GSX400.

If there is a site somewhere that gives me all the details about my bike then I can decide whether this coil will work or not. I was going to use it on my Virago but I think I might be happier with it on the GS.

[Guest]

I can't remember the value of the OEM coils off the top of my head, but if they're 3 ohm then they should be ok. You have to be careful because if the ones you are using have a lower ohm rating, they will draw more current which could damage your ignitor.