sorry if it been posted before new here i got a 1980 gs 1000 i have no spark at all
-
-
I'll break it down for you
Crank triggers signal generator (round cover right side of motor)
Then goes to ignitor (under frame cover or on battery box)
Ignitor amps signal to coils (under tank)
Coils need twelve volts with orange/white wire
Ignitor gets twelve volts with orange/white wire.
Signal generators hardly ever go bad so I'd check the ignitor and coils but first make sure they are getting power from the kill switch.
Do you have a manual? -
yes i have a manuel and ill trace the wires thanksComment
Comment