Now I've done it

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • gssuzukixxx

    #1

    Now I've done it

    When I set the ignition timing on my '77 GS750 with a timing light I can get the F marks to line up at idle but the advance mark doesn't quite line up when I rev it.

    So I took the points plate off to look at the mechanical advance. Everything seems to move freely. The weights move out until they hit the 2 post that are there to limit their travel. So I tried to bend the posts out slightly.

    One of the posts broke off. Now I have to replace the mechanical advance unit...if I can find one. Could that post be brazed or welded back on? Does anyone have a mechanical advance unit they want to sell?

    Brian
  • Guest

    #2
    Post in the "parts wanted" section.
    There's bound to be someone that has one.
    Check eBay?

    Comment

    • Guest

      #3
      There's a whole slew of them on E-bay, varying years and prices, here's the link to the page, have fun!

      http://motors.shop.ebay.com/i.html?_...0+points&_scat=

      Comment

      • gssuzukixxx

        #4
        Originally posted by sedelen
        There's a whole slew of them on E-bay, varying years and prices, here's the link to the page, have fun!

        http://motors.shop.ebay.com/i.html?_...0+points&_scat=
        Thanks But I need the mechanical advance unit...not new points.

        Comment

        • Guest

          #5
          Originally posted by gssuzukixxx
          Thanks But I need the mechanical advance unit...not new points.
          Oh, me bad! A Suzuki Advance Governor Assembly.
          Be careful, I think there might be two different manufacturers, this I can tell you, they're no longer available new from Suzuki, I just checked, perhaps you can find one here! Have Fun!

          http://motors.shop.ebay.com/i.html?_...dvance+&_sacat=

          Comment

          • gssuzukixxx

            #6
            Originally posted by sedelen
            Oh, me bad! A Suzuki Advance Governor Assembly.
            Be careful, I think there might be two different manufacturers, this I can tell you, they're no longer available new from Suzuki, I just checked, perhaps you can find one here! Have Fun!

            http://motors.shop.ebay.com/i.html?_...dvance+&_sacat=
            That is exactly what I need. looks like it was a costly mistake for me.

            Comment

            • Steve
              GS Whisperer
              • Jun 2005
              • 35924
              • southwest oHIo

              #7
              Originally posted by gssuzukixxx
              That is exactly what I need. looks like it was a costly mistake for me.
              Costly?

              Look again, there are SEVEN of them that are $30 or less, including shipping.

              .
              sigpic
              mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
              hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
              #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
              #2 son: 1980 GS1000G
              Family Portrait
              Siblings and Spouses
              Mom's first ride
              Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
              (Click on my username in the upper-left corner for e-mail info.)

              Comment

              Working...