'81 GS550T ignition replica for a few euro !

[Hakamisu]

Sorry, I'm Looking for the dimesions of this board. Could anyone who has one of these let me know?

[kokar]

the PCB is 7cm X 5cm

[Hakamisu]

the PCB is 7cm X 5cm

Thanks. I'm going to be printing a few of these as a test. I appriciate all the hard work you have put in.

[kokar]

if you want I can send to you the negative film of my PCB for free




.

[gmoto]

Noob Questions

I have a failed igniter box on my 1980 GS450L. I am considering building one based on your design. I am very mechanically able, but a bit nooby with electronics. I think I could pull it off, but I need a bit more information. I understand that "R" components are resistors, and "C" components are capacitors, but what are the other parts? The photo I got off the thread of the PC board is too small for me to read all the component numbers, and it looks like some of the parts aren't numbered; could you clarify and post a larger picture?

Sorry for being a simpleton, but I would like to see if I could get enough info to build one with my somewhat limited knowledge.

G

[kokar]

I think that my ignition feed on your bike, I think the only difference my be the colors of your wires and the connector

the wiring diagram of your bike is the following

[ryguy425425]

Very interesting! Have you got it running with the FETs? Tell us more!

I'm also interested! I've got a bad NPN Transistor on my board, and a handful of FETs kicking around. I'm thinking I'll replace the pair with FETs instead of waiting a month for the correct transistor to be shipped in from china if you got yours working.

[kokar]

it can be done, but we need to make a new PCB for FET drivers IR4427 .

[rougarou]

i have used BU941ZPFI from digikey for my 1985 450l igniter box (i had to mount the larger case styles on the outside of the igniter box ) and the higher current transistors worked well as coil drivers

[Guest]

Cracking thread! It's so cool when someone gives their hard-earned knowledge for free. Thanks Kokar, this could come in useful in the future!

[kokar]

thanks Chancho196, but I think this is the meaning of this site
exchange of information helping each other






.

[posplayr]

thanks Chancho196, but I think this is the meaning of this site
exchange of information helping each other






.

Kokar,
You have been very generous in your efforts to reverse engineer this ignition reproduce the PCB and even give it out it for free.I'm sure everybody appreciates your effort.
Jim

P.S. I was wondering if you know how many people got their PCB stuffed and working. I know Wallowgreen is an EE so he should have no problems if he got around to it.

[Wallowgreen]

The troublesome baby kat turned out to have a carburetion problem and I was already working on a second set of carbs for it when the chance of this PCB came along.

So... answer is no, I haven't needed to build this up.... yet. Still have it tucked away for when the need arises!

[kokar]

i run this replica igniter since 2011 with no problem.
Thank you all guys







.

[cletus@live.se]

Sorry for hi-jacking this brilliant thread. Somewhere here it was mentioned that it's suitable f?r GS450 as well. I don't dare building one myself since +/- is my weakest side in life. I did, though, find a cheap GS550 81 ignitor on the web. Will this fit my GS450 81?

Cheers
/Viggo, Ume? Sweden