Almost complete 1982 gs550l but...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Defore

    #16
    A funnel has been sitting there for a few hours. Its not a big funnel but...

    Comment

    • tom203
      Forum Guru
      Past Site Supporter
      • Aug 2010
      • 8925
      • Norway,Maine

      #17
      Originally posted by Defore
      A funnel has been sitting there for a few hours. Its not a big funnel but...
      Well, it ain't the float needle seats leaking then! But, where is this fuel coming from that fouling #3 and 4? leaking choke plunger? needs more thought.
      1981 gs650L

      "We are all born ignorant, but you have to work hard to stay stupid" Ben Franklin

      Comment

      • Defore

        #18
        That's what I'm saying! Blowing my mind...maaaaaybe just maybe my plug caps are cutting in and out?

        Comment

        • tom203
          Forum Guru
          Past Site Supporter
          • Aug 2010
          • 8925
          • Norway,Maine

          #19
          I'll assume you checked for spark on 3 and 4..... and that plug wires are on correct plug..... Anyways,will this bike start without "choke" on ? After it runs a bit on 1 and 2, pull spark plugs 3 and 4, are they dry or wet?
          1981 gs650L

          "We are all born ignorant, but you have to work hard to stay stupid" Ben Franklin

          Comment

          • Defore

            #20
            Yes it starts without choke and I've check the spark and wires and they are wet.

            Comment

            • mike_of_bbg

              #21
              And the wires are on the correct plugs? 1 and 4 fire together and thus come from the same coil, so the non-working #4 plug wire leads back with the working #1? 2 and 3 fire together as well.

              Comment

              • Defore

                #22
                Exactly. All wires are where they should be. Just tested the secondaries on the coils and both have 33k Ohms.
                Last edited by Guest; 04-03-2012, 10:18 PM.

                Comment

                • Defore

                  #23
                  I think i found my problem...I pulled the jets and I notice cylinder one has a different pilot jet. Tho I ordered the right three they sent me ones that have holes in the sides? I'm reposting.

                  Comment

                  Working...