Kokusan Igniter - gs550T - dyna s replacement?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    #1

    Kokusan Igniter - gs550T - dyna s replacement?

    Hi,

    It appears that the Igniter/Ignitor might be dead on my 1981 gs550T. The unit is labled "TR Igniter Kokusan". Anyone know if I can replace that and the signal generator with a Dyna S system?

    Thanks.
  • Nessism
    Forum LongTimer
    GSResource Superstar
    Past Site Supporter
    Super Site Supporter
    • Mar 2006
    • 35787
    • Torrance, CA

    #2
    Yes you can.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment

    • mike_of_bbg

      #3
      Yes, but even though it's Kokusan you still use the Dyna DS3-2 on all EI systems. The DS3-1 for Kokusan ignitions only refers to the early years of 550s and 750s using Kokusan points systems. Although the Dyna S only looks like the sig gen the igniter is "Built in" to that one part, as it connects directly to your coils.

      Comment

      • Guest

        #4
        Originally posted by mike_of_bbg
        Yes, but even though it's Kokusan you still use the Dyna DS3-2 on all EI systems. The DS3-1 for Kokusan ignitions only refers to the early years of 550s and 750s using Kokusan points systems. Although the Dyna S only looks like the sig gen the igniter is "Built in" to that one part, as it connects directly to your coils.
        Ok, thanks for the explanation.. Good to know there is a relatively inexpensive replacement to the ignitor.

        Comment

        Working...