switching to LED turn signals

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • fuelcat

    #1

    switching to LED turn signals

    Hi I just wanted to make sure that I am putting my wires and diods on right for my LED not to flash like hazard lights. I made a diagram please let me know id this is correct. Thank you.
  • Steve
    GS Whisperer
    • Jun 2005
    • 35924
    • southwest oHIo

    #2
    No.............

    .
    sigpic
    mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
    hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
    #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
    #2 son: 1980 GS1000G
    Family Portrait
    Siblings and Spouses
    Mom's first ride
    Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
    (Click on my username in the upper-left corner for e-mail info.)

    Comment

    • fuelcat

      #3
      Originally posted by Steve
      No.............

      .
      Ok what is wrong?

      Comment

      • fuelcat

        #4
        are my diods upside down?

        Do I have my diods upside down?

        Comment

        • JayWB

          #5
          Yes, the striped side of the diodes are the negative, as you have shown. Current needs to flow from the un-striped side towards the striped side. Reverse them both.

          Comment

          • fuelcat

            #6
            Originally posted by JayWB
            Yes, the striped side of the diodes are the negative, as you have shown. Current needs to flow from the un-striped side towards the striped side. Reverse them both.
            thank you! actually I realized that I drew my diagram wrong and I do have the diods the other way around hahaha. My dislexia is a bitch!

            Comment

            Working...