Announcement

Collapse
No announcement yet.

HELP! Turn signals won't come off? It just spins.

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    HELP! Turn signals won't come off? It just spins.

    Hi,

    Attempting to take off the turn signals off of the rear Vetter fairing, however they will just spin. The nut will only unscrew to a certain point, then the inner rod (or whatever) just spins. It won't come off anymore. The plastic shell isn't off enough to try to grab on to the rod to stop it from spinning.

    What I am I missing or doing wrong?

    Unfortunately no time to just get new ones, as I'm supposed to be driving the bike a good distance to Rock Falls Raceway Saturday.

    Thank you,

    Kevin
    Tags: None
    #2
    Figured it out! The inner rod is threaded on both sides, and with a little finesse you can wiggle it loose enough to fit a clamp to hold while you twist the nut off.

    Comment

      #3
      Was about to say...
      sigpicMrBill Been a GSR member on and off since April 2002
      1980 GS 750E Bought new in Feb of 1980
      2015 CAN AM RTS


      Stuff I've done to my bike 1100E front end with new Sonic springs, 1100E swing arm conversion with new Progressive shocks installed, 530 sprockets/chain conversion, new SS brake lines, new brake pads. New SS fasteners through out. Rebuilt carbs, new EBC clutch springs and horn installed. New paint. Motor runs strong.

      Comment

        #4
        I am curious now about the "rear" Vetter fairing.

        Care to elaborate or show some pictures of this particular fairing?

        I have been around Vetter fairings for over 30 years and have never seen one on the rear.

        .
        sigpic
        mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
        hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
        #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
        #2 son: 1980 GS1000G
        Family Portrait
        Siblings and Spouses
        Mom's first ride
        Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
        (Click on my username in the upper-left corner for e-mail info.)

        Comment

          #5
          Rear fairing is in saddle bags/trunk.

          Comment

            #6
            Sorry, never heard that part called a "fairing".

            To me, a "fairing" is something that will deflect or re-direct airflow.

            .
            sigpic
            mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
            hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
            #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
            #2 son: 1980 GS1000G
            Family Portrait
            Siblings and Spouses
            Mom's first ride
            Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
            (Click on my username in the upper-left corner for e-mail info.)

            Comment

              #7
              Originally posted by Steve View Post
              Sorry, never heard that part called a "fairing".

              To me, a "fairing" is something that will deflect or re-direct airflow.

              .
              Yeah, what he said.

              Comment

              Previous template Next
              Working...
              X