help installing turn signal switch

[striker]

so my turn/horn/high low switch wos smashed. i bought a aftermarket K&S it has 9 wires and my 81 gs 850gl has 11 can eny 1 tell me how to wire it up and or whot wires go ware. the original wos so badly busted i have nothing to go buy

[Eric]

Get a wiring diagram here:

http://members.dslextreme.com/users/bikecliff/

[Redman]

......

Get a Suzuki schematic so you do "have something to go by".

And .. tell us what the 9 wires are on your replacement unit.
It come with some schematic? Maybe scan it and post it here.

.

[Qhergt]

Might have something to do with how the horn is wired into it

[Thumper88]

The stock switch has 2 extra wires because one of the stator legs runs through the switch and back to the regulator...White/Green and White/Red wires. If you haven't already wired the stator directly to the regulator, now would be a good time.

[striker]

white- low beam, light green- horn, orange- left turn, dark blue- high beam, gray- turn main, yellow- headlight main, dark green high beam (led), black horn, light blue- right turn. so find the wires going frum the stator to the switch and move them to the regulator?