Doing the stator paper test on 80' 850, (having problems with r/r) got about 90 volts on each stator wire test at 5000 rpms. Is this too much or is this good that it's this high? Just replaced the stator last year. terrylee
-
-
Getting 90 volts AC at 5k between the phases is good. I'm not sure all multimeters are really accurate in the 400 hz range- try another meter if you're concerned.1981 gs650L
"We are all born ignorant, but you have to work hard to stay stupid" Ben Franklin -
I'd call it good and switch focus to the wiring and R/R.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
Thanks guys, wiring already redone, time for new r/r. terryleeComment
Comment