Dyna S

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mario
    • Jan 2026

    #1

    Dyna S

    Throwing the Dyna S setup at it. Green coils and wires to boot. Not happy with the dull looking spark. Any advice? Having some hard start issues, carbs just gone through. 831100e, what plug is best? Having trouble finding paper shop manual.
  • Agemax
    Forum Guru
    • Apr 2008
    • 8371
    • plymouth uk

    #2
    make sure you have 12v at the coils. if not do the coil relay mod.

    find the mod and a manual here...........

    1978 GS1085.

    Just remember, an opinion without 3.14 is just an onion!

    Comment

    • earlfor
      Forum LongTimer
      Charter Member
      GSResource Superstar
      Past Site Supporter
      • May 2002
      • 42410
      • off grid cabin 1/24/26 7pm

      #3
      Originally posted by Mario
      Throwing the Dyna S setup at it. Green coils and wires to boot. Not happy with the dull looking spark. Any advice? Having some hard start issues, carbs just gone through. 831100e, what plug is best? Having trouble finding paper shop manual.
      I always used NGK D9EA in my 83 1100 and 85 1150.
      Komorebi-The light filtering through the trees.

      I would rather sit on a pumpkin and have it all to myself than be crowded on a velvet cushion. H.D.T.

      Comment

      • posplayr
        Forum LongTimer
        GSResource Superstar
        Past Site Supporter
        • Dec 2007
        • 23673
        • Tucson Az

        #4
        measure the voltage to the coils and if not above 12V then do a ignition relay mod.

        I used NGK iridium plugs

        Comment

        Working...