1978 G750 Dyna-S + Coils

[kw86er]

Just want to confirm I am getting the right set up here:

DC1-1 3 ohm Dual Output Coils

http://www.z1enterprises.com/ItemDetails.aspx?itemDescription=Dyna+Dual+Output+3.0+Ohm+Coils+%28pair%29+DC1-1&item=DYDC1-1

Dyna-S for Nippon Densi Ignition (I have the ND ignition)

http://www.z1enterprises.com/ItemDetails.aspx?itemDescription=Dyna-S+Ignition+DS3-2+GS+fours+%28w%2fND+ignition%29&item=DYDS3-2

Some plug wires

http://www.z1enterprises.com/ItemDetails.aspx?itemDescription=Dyna+Ignition+Wires+7mm+copper+core+%28red%29&item=DYDW300

Anything else I need or should get to get the job done right?

[koolaid_kid]

Looks good. I suggest the crimping tool also, it is only $12.

http://www.z1enterprises.com/ItemDetails.aspx?itemDescription=Dyna+Spark+Plug+Wire+Crimping+Tool&item=DYCT-1

[exdirtbiker]

I talked to a guy at Dynatek last week. He said same thing. And "keep your resistor caps . They just unscrew from your old plug wires. If you don't want to use resistor caps, buy the resistor plug wires."

[kw86er]

one of my resistor caps is cracked and taped up. I was going to get the NGK Caps.

these for 2 and 3:

http://www.z1enterprises.com/ItemDetails.aspx?itemDescription=NGK+Spark+Plug+Cap+14mm+102+degree+elbow+XB05F&item=TU38-1007

and these for 1 and 4

http://www.z1enterprises.com/ItemDetails.aspx?itemDescription=NGK+Spark+Plug+Cap+14mm+120+degree+elbow+YB05F&item=TU38-1010

I not sure about the thread size though? 10mm,12mm,14mm... ?

[koolaid_kid]

Your plugs have 14mm thread size.

[kw86er]

Nice, thanks!

[exdirtbiker]

Seems we are in a parallel universe ???
.. except I bought same coils, wires and ignition before I thought about the caps.
can anyone confirm the caps above are also the correct ones for my 79 GS1000L ?