Replacing HT leads which to buy?

[Guest]

Hi guy's

am going to fit new HT leads to my stock suzuki coils. My question is what are the best type to buy i'm looking at the Dyna DW 600 wires or the DW 300. The DW 600 are suppression wire is this ok for my 1982 GS1100e.

Any help /advice appreciated

Richard

[MisterCinders]

IIRC if you use suppression wire, you need non-resistor plug caps, and vice-versa. Plug caps are pretty cheap, so it's probably dealer's choice. If you are only changing the wires, make sure you get the right ones for your existing caps, which I believe are resistor caps.

[Nessism]

Suzuki uses non resistor type, copper core, 7mm wire. You can order this same type from Dyna (Z1 Enterprises). Couple with some new NGK resistor type caps and you should be good to go.

Alternate to this is any common 7mm suppressor type wires and non resistor plug caps. Available at common auto parts stores.

[carvan40]

Thanks for the replies. I'll go with the Dyna DW 600 suppressor leads which have the caps on them already.

Cheers