I am looking for a 4-way rectangular button for my left hand control switch. One of the retaining tabs is broken off of mine, and the PO has glued the other one on. It fits kinda loosely, so I know it's just a matter of time. I don't need the whole control switch, just the button will do as long as both tabs are intact. Anyone have one? I originally posted this in parts wanted section, thought I would try here hoping to get more eyes on it.
-
https://drive.google.com/open?id=0B9zH8w8Civs8ejBJWjdvYi1LNTg&resourcekey=0-hlJp0Yc4K_VN9g7Jyy4KQg&authuser=fussbucket_1%40msn.com&usp=drive_fs
1983 GS750ED-Horsetraded for the Ironhead
1981 HD XLH
Drew's 850 L Restoration
Drew's 83 750E Project -
Let me check my parts bins,should have at least 1 here. -
https://drive.google.com/open?id=0B9zH8w8Civs8ejBJWjdvYi1LNTg&resourcekey=0-hlJp0Yc4K_VN9g7Jyy4KQg&authuser=fussbucket_1%40msn.com&usp=drive_fs
1983 GS750ED-Horsetraded for the Ironhead
1981 HD XLH
Drew's 850 L Restoration
Drew's 83 750E ProjectComment
-
Fast look though came up with none.Sold so much stuff I might have sold all of them
I will keep an eye out here but it's not looking to good.
Comment
-
I can take a look when I get home in the next couple of days.Comment
-
https://drive.google.com/open?id=0B9zH8w8Civs8ejBJWjdvYi1LNTg&resourcekey=0-hlJp0Yc4K_VN9g7Jyy4KQg&authuser=fussbucket_1%40msn.com&usp=drive_fs
1983 GS750ED-Horsetraded for the Ironhead
1981 HD XLH
Drew's 850 L Restoration
Drew's 83 750E ProjectComment
-
https://drive.google.com/open?id=0B9zH8w8Civs8ejBJWjdvYi1LNTg&resourcekey=0-hlJp0Yc4K_VN9g7Jyy4KQg&authuser=fussbucket_1%40msn.com&usp=drive_fs
1983 GS750ED-Horsetraded for the Ironhead
1981 HD XLH
Drew's 850 L Restoration
Drew's 83 750E ProjectComment
-
still looking
Still looking for the switch button. It looks like this one:
I really only need the rectangular button, but I'll take the whole switch if need be. I'm halfway considering a new one, since I already have new on the right side, but I'd rather spend the money on a set of Shinko's.https://drive.google.com/open?id=0B9zH8w8Civs8ejBJWjdvYi1LNTg&resourcekey=0-hlJp0Yc4K_VN9g7Jyy4KQg&authuser=fussbucket_1%40msn.com&usp=drive_fs
1983 GS750ED-Horsetraded for the Ironhead
1981 HD XLH
Drew's 850 L Restoration
Drew's 83 750E ProjectComment
-
Go look for one on ebay. That model hand control was sold on more than one GS model. Understand that they used two different harness types though. You may have to swap the harness from your current switch. If buy one it's a good idea to take it apart for cleaning regardless so no worry about the harness. Know upfront though that there are a bunch of really small pieces in there so you need to pay attention.
Last edited by Nessism; 01-26-2014, 05:42 PM.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
Spent the weekend with my mom
Sorry
I'll look for sure next week.Comment
Comment