Coil Physical Size Question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Nessism
    Forum LongTimer
    GSResource Superstar
    Past Site Supporter
    Super Site Supporter
    • Mar 2006
    • 35808
    • Torrance, CA

    #16
    The factory Suzuki service manual for the GS1000, early points bikes, lists the spec at "Approx.4 ohms". They do not list a tolerance. Later bikes, with electronic ignition, have the spec at "3-5 ohm". So basically, not much help by measuring if you want to determine the difference between these.

    What do the spark plug caps look like? Do all four leads have the long caps? If so, they are most likely from a 1100E. It two are long and two short, most likely GS1000 coils.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment

    • Guest

      #17
      I prefer using the late '80's GSXR coils. Or '90's version. A better alternative to the original stock coils which are a little lethargic.
      G

      Comment

      Working...