S 1100 Electrex Regulator Rectifier

[harley10]

Street fighter , I think Posplayr can help you out , he has everything you need and his knowledge as well, Try him ,Brian

[posplayr]

Street fighter , I think Posplayr can help you out , he has everything you need and his knowledge as well, Try him ,Brian

The only thing that has not been said so far is the size of the r/r. Most of the information I have consolidated in the gs stator link is from Tom and Steve.
I don't know which r/r looks closest to the stock Kat r/r and if the op has that as a primary concern I can't help.

I did a side by side size compare of the sh775 and the compufire in the SSPB I nstall guide under the installation thread again in my signature.

[Street Fighter]

Steve
what are the measurements of the Polaris 4012941

[Street Fighter]

here is the size of the poloris from parts pit stop
its to big for the stock katana location
H= 4.5000 W= 6.5000 L= 6.5000.
whats the second choice? for a rr

[Nessism]

here is the size of the poloris from parts pit stop
its to big for the stock katana location
H= 4.5000 W= 6.5000 L= 6.5000.
whats the second choice? for a rr

This information is wrong.

If you explore the links provided in this thread you will find the correct information

[cowboyup3371]

It fit using the stock mounting location on my 550 without a problem. I can try to get to the garage tomorrow for measurements if you want.

[Street Fighter]

yes measurements thanks