SH 775 on a 1000E?.. It's tight.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 81ZUKI75
    Forum Mentor
    • Jun 2008
    • 364
    • TN

    #16
    Here's a comparison of the original (Right) and the replacement (left) on my GS750TZ...



    OEM installation..



    and here is the replacement installed...tight, tight, tight...

    sigpic
    1981 Suzuki GS750E (one owner), 1982 Suzuki GS750T (my "tinker" toy), Previous (First) Bike: 1979 GS425 (long gone)
    2002 Suzuki Bandit 1200S (new to me in 11/2011)

    Comment

    • JMHJ

      #17
      I removed the helmet holder on my 850 and mounted my Electrosport there, outside the sidecover. I thought it would cool better there, and it didn't look too bad. I think I used only one of the bolts, and maybe a wire tie in the other R/R mount hole, attached to the frame.

      Comment

      • posplayr
        Forum LongTimer
        GSResource Superstar
        Past Site Supporter
        • Dec 2007
        • 23673
        • Tucson Az

        #18
        Originally posted by JMHJ
        I removed the helmet holder on my 850 and mounted my Electrosport there, outside the sidecover. I thought it would cool better there, and it didn't look too bad. I think I used only one of the bolts, and maybe a wire tie in the other R/R mount hole, attached to the frame.
        read GS Stator in my signature

        Comment

        • tkent02
          Forum LongTimer
          Past Site Supporter
          • Jan 2006
          • 35571
          • Near South Park

          #19
          Originally posted by tkent02
          This is what I'm looking at?..



          Also trying to make room for a SSPB in there somewhere.
          New plan, might work? Put the turn signal controller down on the frame about six inches lower than it is now. Just strap it to the frame since the hoop for the mounting bracket is broken off anyway. The SSPB in the top left corner where the signal controlller is now. Might just leave enough space for the R/R in the rear top corner?.. Maybe.

          Got to see how big that SSPB is?.
          http://img.photobucket.com/albums/v5...tatesMap-1.jpg

          Life is too short to ride an L.

          Comment

          • JMHJ

            #20
            can't see 'em; don't have my preferences set for that.

            Originally posted by posplayr
            read GS Stator in my signature

            Comment

            • posplayr
              Forum LongTimer
              GSResource Superstar
              Past Site Supporter
              • Dec 2007
              • 23673
              • Tucson Az

              #21
              Originally posted by JMHJ
              can't see 'em; don't have my preferences set for that.
              So be it............

              Comment

              • Guest

                #22
                posplayr is malware

                Comment

                • posplayr
                  Forum LongTimer
                  GSResource Superstar
                  Past Site Supporter
                  • Dec 2007
                  • 23673
                  • Tucson Az

                  #23
                  Originally posted by chef1366
                  posplayr is malware
                  Check that..

                  Comment

                  • tom203
                    Forum Guru
                    Past Site Supporter
                    • Aug 2010
                    • 8925
                    • Norway,Maine

                    #24
                    Originally posted by JMHJ
                    can't see 'em; don't have my preferences set for that.
                    You'll want to do some reading- the E/S r/r is outdated. Series r/r units are now available for cheap money and these are better at keeping your stator running cooler.
                    1981 gs650L

                    "We are all born ignorant, but you have to work hard to stay stupid" Ben Franklin

                    Comment

                    • tatu
                      Forum Sage
                      Past Site Supporter
                      • Jun 2010
                      • 3175
                      • UK

                      #25
                      I did this, Does it help?

                      sigpic

                      Don't say can't, as anything is possible with time and effort, but, if you don't have time things get tougher and require more effort.

                      Comment

                      • JMHJ

                        #26
                        Ahh, I didn't know that. It was several years ago when I bought that one.

                        Originally posted by tom203
                        You'll want to do some reading- the E/S r/r is outdated. Series r/r units are now available for cheap money and these are better at keeping your stator running cooler.

                        Comment

                        • JMHJ

                          #27
                          But no personal offense intended, I'm sure...

                          Originally posted by JMHJ
                          can't see 'em; don't have my preferences set for that.

                          Comment

                          Working...