Yamaha r/r
Collapse
X
-
Yamaha r/r
Been working on a guy's 1983 Yamaha Venture for quite a while. Thought I was done, but looks like r/r is bad. Does anyone know if the sh775 would work on this bike? By the way Yamaha put the r/r right above the muffler, think I might try to relocate the new one. terryleeTags: None -
If the Yamaha has the same type system with permanent magnets and shunting the excess to ground it should work fine.
I know there's a Venture forum out there with guys who know more about it. -
I'll go on a "L"imb and guess it's a field regulated alternator- i.e. brushes and slip rings. The R/R would then have two extra smallish wires feeding the field on the alternator. If so, suspect the brushes especially if the R/R appears to be a Shindengen which yamaha used frequently.1981 gs650L
"We are all born ignorant, but you have to work hard to stay stupid" Ben FranklinComment
-
Hang on, Tom, I'm getting ready to cut that limb down.
My son's previous '83 Venture and his current '86 Venture Royale both have permanent magnet and stator systems, just like the GS.
The Polaris regulator should work just fine.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
My '82 Seca does not have brushes, according to the wiring diagram I have.sigpic Too old, too many bikes, too many cars, too many things
Comment
-
terrylee
Thanks guys, thought it might have same stator (has three white wires). Going to double check tests, but everything points to bad r/r. terryleeComment
-
1981 gs650L
"We are all born ignorant, but you have to work hard to stay stupid" Ben FranklinComment
-
terrylee
more venture r/r questions
Ok, Have couple of spare r/r was going to try on Yamaha venture, just to make sure this is the problem before ordering sh775. The wiring on the venture has two red positive wires, two black negative wires, and brown sense(?) wire, from one plug. And three white wires in separate plug. Just wanted to make sure I could combine positives together, negatives together, and not worry about the sense wire? terryleeComment
-
Guest
Don't know if anything listed here would help. http://www.venturerider.org/forum/sh...ad.php?t=42358Comment
-
terrylee
Thanks, been on that site but didn't see those. Looks like be ok on hooking reds together and blacks together, looks like they join together right after leaving plug. But not sure about brown wire. Looks to go to fuse box, ignition switch. Maybe it's not a sense wire after all? terrryleeComment
-
850GT_Rider
Why are we discussing a Yami r/r issue here? Got an "Other Bikes" forum for that, right? Just sayin'
Comment
-
terrylee
Sorry just trying to get alittle advise for a bike I'm working on as a favor to someone without having to join another forum. Don't want to feel like a traitor!
Thought since some folks have more than one kind of bike (or have had) might have some thoughts. Didn't mean to upset anyone! terrylee
Comment
-
terryleeComment
-
850GT_Rider
No big deal, just havin' some fun.....Sorry just trying to get alittle advise for a bike I'm working on as a favor to someone without having to join another forum. Don't want to feel like a traitor!
Thought since some folks have more than one kind of bike (or have had) might have some thoughts. Didn't mean to upset anyone! terryleeComment
Comment