1978 gs 1000 e charging system

[posplayr]

Stator is toast.

Btw good job on doing the tests.

[lrgguy]

Stator is toast.

Btw good job on doing the tests.

Thank you for your kind words ... now tell me please ??
Do any of those numbers tell you if the regulator or the rectifier are bad or good ?
Sure id like to replace with something like what you suggested . But if I dont have to replace them now . Id rather not !!
Its a money thing .. you know single dad raising 2 kids

[lrgguy]

Id like to thank you all for your support , suggestions , knowledge and most importantly for dealing with a newbie such as myself and not giving up !! Im sure I came close to losing a few of you .. thx thank you and thanx again from your neibering KANADIAN friend ... lol

[rustybronco]

I doubt you lost any of us.

Still looking for any numbers off the 650's R/R if possible.

[posplayr]

Thank you for your kind words ... now tell me please ??
Do any of those numbers tell you if the regulator or the rectifier are bad or good ?
Sure id like to replace with something like what you suggested . But if I dont have to replace them now . Id rather not !!
Its a money thing .. you know single dad raising 2 kids

When you came to the GSR, you have entered the intersanctum of cheaptom. So when we say change the R/R and get an SH-775 remember where it is coming from.

If your kids don't have enough to eat then get the bike running and sell it. Sorry for being so blunt, but that is basically it. There is not much choice about fixing it, there is only a choice about whether you can afford that.

[Guest]

You also know that life turns on a dime, so park it until you can afford a new stator and SH-775 and you will be able to do that. In the mean time you have plenty of time to do all the required maintenance. When the money comes it will be a pitzacake.

[rustybronco]

Good used stator can be found as well as a good used reg-rec.

Just sayin'

[lrgguy]

When you came to the GSR, you have entered the intersanctum of cheaptom. So when we say change the R/R and get an SH-775 remember where it is coming from.

If your kids don't have enough to eat then get the bike running and sell it. Sorry for being so blunt, but that is basically it. There is not much choice about fixing it, there is only a choice about whether you can afford that.

The kids are always eating !! Lmfao

[lrgguy]

I doubt you lost any of us.

Still looking for any numbers off the 650's R/R if possible.

I found the paper that came with that rectifier im using on my gs650gl
Its fom Ricks motorsport universal R/R for 3 phase permanent systems part #10-502

[rustybronco]

Now all you need to do is find a stator to fit.

I'll be installing one from a GS1100GK on mine.

[lrgguy]

Now all you need to do is find a stator to fit.

I'll be installing one from a GS1100GK on mine.

What yr is the gs1100 gk . So your saying a stator from that bike will fit in the gs1000e ?

I checked my local bike salvage place and they dont have a statorfor the 78gs1000e . But if that fits I can ask him ifhe has a stator for the gs1100 gk

[lrgguy]

Wondering if a stator from a 1980 gs 1100 will fit in the 78 gs1000
A motorcycle salvage shophere has one for $80 the old bikeyard

[rustybronco]

You can almost buy a new one for that amount.

What yr is the gs1100 gk . So your saying a stator from that bike will fit in the gs1000e ?

I think the GK was an 83??

Other than having only three terminals instead of five, yes it will fit.

[lrgguy]

You can almost buy a new one for that amount.


I think the GK was an 83??

Other than having only three terminals instead of five, yes it will fit.

Around here I have cakled almost every bike parts supplier and new there $285 down tothe cheapest I have found $175 .. no access to ordering online !!

[rustybronco]

Get online access.

http://www.ebay.ca/itm/Suzuki-GS1100E-GS-1100E-GS1100-E-1982-Alternator-Stator-/171342474607?pt=Motorcycles_Parts_Accessories&hash=item27e4cead6f&vxp=mtr

Don't know if it will fit or not. The gentlemans name is mike. He is a member of this board. Ask him for some measurement or Call and ask him.

http://www.thegsresources.com/_forum/member.php?u=11970