Dyna 2000

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Mick
    • Feb 2026
    #1

    Dyna 2000

    Are accel coils and 8.8 wire compatible with dyna 2000
    Tags: None
    • Nessism
      Forum LongTimer
      GSResource Superstar
      Past Site Supporter
      Super Site Supporter
      • Mar 2006
      • 35788
      • Torrance, CA
      #2
      Check the resistance specs/requirements for both.
      Ed

      To measure is to know.

      Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

      Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

      Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

      KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

        Comment

        • posplayr
          Forum LongTimer
          GSResource Superstar
          Past Site Supporter
          • Dec 2007
          • 23673
          • Tucson Az
          #3
          Originally posted by Mick
          Are accel coils and 8.8 wire compatible with dyna 2000
          Chef is running 3 ohm green dyna coils with the 2000. It just gets hotter spark at 2.2 ohms. The resistor wires will not hurt as you are closer to a stock cool, so I would assume coil is matched to wires not the dyna 2000

            Comment

            • koolaid_kid
              #4
              The yellow Accel coils are 3 Ohm and are compatible with electronic ignitions. I ran them on my GPz750. They will be fine with a Dyna 2000.

                Comment

                Previous template Next
                Working...