I havnt rode much at night. Well last night i went for a rip. Noticed on decel a little popping on 2&3, with flame! Looked cool as hell but needs to stop.. Just recently put in a dyna ignition and me thinks 2&3 are out of time just a bit perhaps. Thoughts?
-
-Mark
Boston, MA
Suck Squeeze Bang Blow..
sigpic
1980 GS850G with 79 carbs..... -
Flames are not a good sign, Mark. That's raw fuel igniting in your pipes so yes, it's a probably a valve issue of some sort...clearances and timing would be the front runners.'83 GS650G
'83 GS550es (didn't like the colours in the 80's, but they've grown on me)Comment
-
I did shim prior to the new dyna ignition. I will check the timing.-Mark
Boston, MA
Suck Squeeze Bang Blow..
sigpic
1980 GS850G with 79 carbs.....Comment
-
You running an open exhaust?Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
open but baffled-Mark
Boston, MA
Suck Squeeze Bang Blow..
sigpic
1980 GS850G with 79 carbs.....Comment
-
1982 GS1100E V&H "SS" exhaust, APE pods, 1150 oil cooler, 140 speedo, 99.3 rear wheel HP, black engine, '83 red
2016 XL883L sigpic Two-tone blue and white. Almost 42 hp! Status: destroyed, now owned by the insurance company. The hole in my memory starts an hour before the accident and ends 24 hours after.Comment
-
You got me, no they are not open. And on another not, adjusted the timing now no more flames.-Mark
Boston, MA
Suck Squeeze Bang Blow..
sigpic
1980 GS850G with 79 carbs.....Comment
Comment