what should I be looking to buy?

[Guest]

I have a 1981 gs 110 0, turbo. It has a totally stock ignition. What should I get? Dyna, dyna s, etc? Also, how many ohms are the coils.

[60ratrod]

Is this the bike you are trying to do the super build on? if so, i would probably venture a guess and say the dyna 2000 kit. otherwise if not, then i would leave the ignition alone if it's working as far as the ignitor and signal generator are concerned and go with some 3.0 ohm dyna green coils. iirc, the stock ohm is between 3 ohms and 5 ohms, but closer to 3. i can't remember exactly. now if the signal gen or ignitor is shot, then a dyna s is a popular choice. i think there is another company out there that makes something similar to the dyna s, but i can't remember what it is off the top of my head. and there is still the dyna 2000. like i said, if it's for the super build that you have been talking about, the dyna 2000 is probably going to be your best bet since you can adjust your ignition curves.

[Guest]

I'd use a Dyna 2000 since they will retard the timing so you can really use that Turbo

[GSX1000E]

I'd use a Dyna 2000 since they will retard the timing so you can really use that Turbo

More boost and less chance of detonation. Cheap insurance.

[Guest]

More boost and less chance of detonation. Cheap insurance.

Actually I meant to say Dyna 4000

[JTGS850GL]

2000SE allows for timing based on boost and temperature input. It's PC programmable as well. Seems like the perfect fit.