What's the right kind of wire...

[tfb]

... for rewinding my GS1000S stator?

Yes, the old one was fried beyond belief, black and gnarly and an 'orrible sight indeed, Your Honour. So I forked out and bought a newie on eBay, installed no problems and the charging system is sparky and zappy once again. Schweet!

However, looking at the old cooked stator now currently parked on my workbench, I thought that it would be a bit of a waste just tossing it in the bin...

... so I'd like to have a shot at rewinding it myself.

Can anyone tell me

1. what grade and/or type copper winding wire I will need;
2. approx. what length I'll need; and
3. what might be the pitfalls on the path to a successfully rewound stator, that you chaps/ chappettes are aware of?!

Cheers,
Mike.

[SVSooke]

I thought this was in the home page but no it's in BassCliff's site,I found it so that's what matters http://members.dslextreme.com/users/...-ends.html#A12

[tfb]

You're a legend, thanks!

Looks to be straight-forward. In fact the most difficult part will prob. be trying to source a quality epoxy resin here in the antipodes. I'll let yers all know how I go...