Which extraction tool for GS electrical connectors? '82 Katana

[SPEIRMOOR]

The PO put dielectric grease in all the connectors that I've pulled apart so far. Who knows what tool I need to extract the pins from their connectors?

[Nessism]

I don't think it's a one size fits all. You might want to order a few different sizes.

[jsandidge]

I've used small eyeglass flat blade screwdrivers.

[SPEIRMOOR]

I've used small eyeglass flat blade screwdrivers.

If it was one or two pins I'd try that but it looks like I'll have to do way more and the correct tool will be invaluable

[850GT_Rider]

I had fairly good luck with this one, but be careful how much side torque you put on the extractor pins. They WILL bend (don't ask me how I know)

http://www.z1enterprises.com/ItemDetails.aspx?itemDescription=Terminal+Pin+Extractor+Tool&item=KL35-9266