the turn signal control on my 2nd skunk was bad (pretty standard for these bikes i think). i could have just replaced the left handle bar control with one of these:
but i wanted to come up with something that could be plugged in to the TSCU plugs and work with relays. this is the very sloppy schematic i drew when i finally came up with a plan that i thought might work:
2 12v dpdt relays and one spdt relay. the dpdt's i bought from amazon. https://www.amazon.com/dp/B00REFBL7A/ref=cfb_at_prodpg
the spdt i took out of a junk car. the whole thing would probably cost $20. here's what it looks like in rough form. i'll hopefully get it cleaned up a bit now that i know it works.
so if anyone is interested i can do a cleaned up schematic, explain how it works and/or take better pictures.
to be clear, it doesn't cancel automatically like the original unit but instead cancels by pushing down on the handlebar control switch.
but i wanted to come up with something that could be plugged in to the TSCU plugs and work with relays. this is the very sloppy schematic i drew when i finally came up with a plan that i thought might work:
2 12v dpdt relays and one spdt relay. the dpdt's i bought from amazon. https://www.amazon.com/dp/B00REFBL7A/ref=cfb_at_prodpg
the spdt i took out of a junk car. the whole thing would probably cost $20. here's what it looks like in rough form. i'll hopefully get it cleaned up a bit now that i know it works.
so if anyone is interested i can do a cleaned up schematic, explain how it works and/or take better pictures.
to be clear, it doesn't cancel automatically like the original unit but instead cancels by pushing down on the handlebar control switch.
.png)
Comment