SH775 swap - engine won't rev over 6k

[Nessism]

Thanks. My next step will be to re-route that stator wire direct to the R/R. Is that recommended even with a stock R/R or only with the SH775?

Yes, fixing the wiring, including the grounding, should be done regardless of whatever R/R is used. Also check for resistance in the power wire leaving the R/R.

[hotrodalex]

I rewired the stator directly to the R/R.

But I checked the valves and swapped 2 exhaust shims and 1 intake shim. That seems to have fixed the problem. The engine starts better and revs normally now. Electrical system seems fine.

[tom203]

I rewired the stator directly to the R/R.

But I checked the valves and swapped 2 exhaust shims and 1 intake shim. That seems to have fixed the problem. The engine starts better and revs normally now. Electrical system seems fine.

Thanks for update...it might inspire others .