Spark Plug Caps

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    #1

    Spark Plug Caps

    I replaced the spark plug caps that come from the ignition coil to the two outer plugs. However, I may need to replace the inner plug caps as well. The problem is, I feel like I can't remove them, at least not without breaking something. How does one remove them?20190803_164743.jpg
  • Guest

    #2
    Inside view 20190803_164757.jpg

    Comment

    • Brendan W
      Forum Sage
      Past Site Supporter
      • Jul 2013
      • 4931
      • Wexford, Ireland

      #3
      Push up the rubber rain cap and then unscrew the cap from the lead.
      97 R1100R
      Previous
      80 GS850G, 79 Z400B, 85 R100RT, 80 Z650D, 76 CB200

      Comment

      • Redman
        Forum LongTimer
        Past Site Supporter
        Super Site Supporter
        • Mar 2004
        • 13762
        • Michigan, west Michigan

        #4
        Pull that rubber boot away from the cap, so it goes up the wire some.
        Hold wire close to the cap, pull and twist the cap off the wire.

        Note: the two inside caps are different part number than the two outside ones.
        Bikes
        Had 650G & 850G. GK since 2005. BOTM 850G 6/2024 , GK 9/2015​

        Comment

        Working...