Not really up with electrics so would appreciate some advice if possible. When I insert the key into the ignition switch and turn on the green neutral light and oil light come on briefly then lose power and go out so I turn off with the key and turn on again and it is okay. Sometimes I have to do this twice. Does anyone know where I should start looking please.
-
-
Your ignition switch
You have to go in by taking the headlight shell out of the way
Then, 2 mounting bolts from the bottom and put the switch on your bench
I small bolt to remove the electrical plate
Carefully remove the plastic cover, there's a small spring and ball in there
Clean all of the copper contacts on the plate with 2000 grit sand paper, or chemically clean
Same with the plates
A dab of dielectric grease and assembly is the reverse of disassembly
If it looks burnt, post up some pictures
And clean the wire connector1978 GS 1000 (since new)
1979 GS 1000 (The Fridge, superbike replica project)
1978 GS 1000 (parts)
1981 GS 850 (anyone want a project?)
1981 GPZ 550 (backroad screamer)
1970 450 Mk IIID (THUMP!)
2007 DRz 400S
1999 ATK 490ES
1994 DR 350SES
Comment