Dyna S Ignition on gs425

[Hokano12]

Hello,
The PO of my bike installed a dyna s ignition system on the bike but seemed to leave the stock ignition coils on the bike, the condensers on the stock coils aren't being used as the wire coming from them is cut. I've had it for about 6 months now and haven't had any issues with it at all luckily, but was wondering if I should switch to dyna coils? If so would it be the 3ohm or 5ohm? Gonna leave it for now since it's working but was just curious!

[Nessism]

There are no condensers on coils, stock or otherwise. ??

[Hokano12]

Aren't the small cylinder things at the end of the coils condensers? Anyways the wires coming from those on the stock coils are cut.

Part number 16 on this diagram:
https://www.suzukipartshouse.com/oem...7d4/electrical

[Nessism]

Holy SH#T! I stand corrected. The condensers are almost always next to the points but not on the 425. I'd remove them and keep riding. Dyna coils are not better than the OEM coils. If it ain't broke, don't fix it.

[Hokano12]

Hahaha knew I wasn?t goin crazy! Thanks for the input! Will leave them in for the foreseeable future 😎